I have the Duo X2 modchip in my xbox along with the evox dashboard. Just now i FTP'd a bios that i found known as flashBios under downloads of ** Links to Xbox Warez and Torrents **.com in the bios folder in the C drive of the xbox. Then i used the flash utility in evox and flashed "flashbios". I need it back to my original bios please help as I am not able to load bios from the xbox hard drive or from cd.

i accidently flashed with a bios called flashbios 3.0.3, it has the following options: "enable network flashing", "load bios from hdd", "load bios from disc", "unlock HDD", "lock hdd". Load bios from hdd and disc has no luck. I cannot FTP either. I need to have the right bios which is the blue Xbox logo which says "xecuter 2" underneath the logo in order to play games.

WEll, I am not sure if it would work in this instance, but what you need to do, is se HTTP to reflash the bios, set up your network, then use http in IE, or something similar. I am not sure if this is the correct place to find a tutorial for it, but it is where I found one for my X3 when I messed it up. Go to the Xecutor Website, and it will have a tutorial on how to use the FLashbios to re-flash your chip with the right bios. Good Luck.

Paintball

xecuter website isn't working

Yes it is.
http://www.team-xecuter.com/

Here is the tutorial for flashbios.

oh the flash bios thing gave me a different website sorry..

i want to disable this because i need to put a good bios as it is not letting me put a bios because of flashBIOS 3.0.3 (http://www.team-xecuter.com/flashbios/http.htm). It reveals how to change the x3 flash protection but i need to know how to change in a DuoX2 chip

Duox 2 does not have a flash protection. You will need a program to reflash that cip. Sorry but I can not rember what program it is at the moment, stuck at work.

as soon as you remember can you please post it here i will keep checking..

You should be able to flash just fine with flashbios.. Best bet is to network flash a new bios; read the tutorial on the team-xecuter link theperfekt001 gave you.

Like philmccan said, duox2s don't have flash protection.

Also, moving to the Duox2 forum... and merging with your other thread on this.

well i tried that and every technique weather it is flash from hdd or flash from cd or even network flash seems to fail. It gives the error that is on the site "Unknown flash! Halting". And they claim that this occurs because there is flash protection. Btw can someone send me the program that they were talkin about?

That's usually an indication of poor soldering on one or more LPC connections (could be on the chip itself or on the motherboard)