I used my new Digital Caliper to measure the 360's heatsink mounting holes. I need it for a mod I'm working on. I figured I would post them up here just in case other people needed them.

Basically the holes are 60mmx60mm, thats center to center. The heatsinks have a 11mm gap between them. The diaginal is 85mm. I used the backplate I cut off my Xbox's cage.


------
(couldn't get it to exact 60.00mm for the pic, but oh well)


------

------



Hope that helps someone! I'll try and update later with more measurments, like hole diameter, CPU/GPU height, and whatever anyone wants.




-CollinstheClown

thanks for posting that, im sure it will help others.

so are you making your own heat sink or something?

Not quite. I have a pair of Maze4 chipset blocks. These actually. But in order to mount them I have to make new tops for them. Here is the basic plan:
http://s34.photobucket.com/albums/d133/Col...ent=3DMount.jpg

The measurments on that are way off, it was before I got my caliper. I used a ruler to get a rough idea of the size.




-CollinstheClown

i get ya, makes more sense now. good luck with it