Scenyx Entertainment Community > Which Drive Do I Choose?

Shadowz O Death

Mar 20 2007, 09:46 PM

Hello everyone! How would I turn on my Xbox 360 while it's opened? Thank you very much!

Sincerely,
Jason

chorizo1

Mar 20 2007, 10:32 PM

use your controller.

ScrewinGates

Mar 20 2007, 11:38 PM

or if you mean while out of the case you can take a toothpick and poke the little button where the rol was before

Shadowz O Death

Mar 21 2007, 12:10 AM

QUOTE(ScrewinGates @ Mar 20 2007, 06:45 PM)

or if you mean while out of the case you can take a toothpick and poke the little button where the rol was before

Thanks! I just took the button LED off.

sosotiit

Mar 21 2007, 02:03 AM

QUOTE

Hello everyone! Which chipset do I connect my SATA cable to when flashing my TS-H943 ms25? North birdge or south bridge? Thank you very much!

Sincerely,
Jason

your post from technical transfered here!!! and stick to one thread (not 4).

rgds,soso

Shadowz O Death

Mar 21 2007, 11:12 PM

Hello everyone! I've used Xtreme Boot Maker 0.5.3 to create the firmware hack files on my C partition. Anyways, I've burned NTFS4DOS to a disk and booted it up on my computer. When I received the message reading "Select from Menu [0123], or press [ENTER - Singlestepping (F8) is: OFF", I clicked enter. Then when I received the message reading "Do you use this version of NTFS4DOS for private usage only?", I type "Yes" without the quotes followed by pressing enter. My question is, what do I do now to access MTKFlash or whatever? Thank you very much!

Sincerely,
Jason

Xbox360Guru

Mar 22 2007, 12:09 AM

QUOTE(Shadowz O Death @ Mar 21 2007, 06:19 PM)

Hello everyone! I've used Xtreme Boot Maker 0.5.3 to create the firmware hack files on my C partition. Anyways, I've burned NTFS4DOS to a disk and booted it up on my computer. When I received the message reading "Select from Menu [0123], or press [ENTER - Singlestepping (F8) is: OFF", I clicked enter. Then when I received the message reading "Do you use this version of NTFS4DOS for private usage only?", I type "Yes" without the quotes followed by pressing enter. My question is, what do I do now to access MTKFlash or whatever? Thank you very much!

Sincerely,
Jason

As long as you change directorys to where xtreme boot maker laid out the files, you're good to go.
mtkflash r /m /sata orig.bin to backup original firmware
mtkflash w /m /sata x52x.bin to put new firmware on

Shadowz O Death

Mar 22 2007, 12:54 AM

QUOTE(Xbox360Guru @ Mar 21 2007, 07:16 PM)

As long as you change directorys to where xtreme boot maker laid out the files, you're good to go.
mtkflash r /m /sata orig.bin to backup original firmware
mtkflash w /m /sata x52x.bin to put new firmware on

I just changed the directory to the C partition by typing in "C:" without the quotes, then I typed in "cd XTREME" without the quotes. One more thing... Can't you just use the "xRead 1234567 12345" and "xFlash 1234567 12345" commands to back up the original firmware and install the hacked firmware? Thank you very much!

Sincerely,
Jason

Shadowz O Death

Mar 22 2007, 01:51 AM

Also, I'm creating a new partition on my hard drive for Xtreme Boot Maker to copy the files to. How big should the partition be? Is 1 gigabyte good? Thank you very much!

Sincerely,
Jason

Shadowz O Death

Mar 23 2007, 12:54 AM

Hello everyone! I'm using Xtreme Boot Maker 0.5.3 and Xtreme52 to hack the firmware of my TS-H943 ms25 DVD drive. When it asks to choose a drive, which do I choose from the following list?

XTREME Pri Master
XTREME Sec Master
XTREME Pri Slave
XTREME Sec Slave

Thank you very much!

Sincerely,
Jason

sosotiit

Mar 23 2007, 01:36 AM

Merged your post,

you need to read man, I told you about multiple thread and starting a post every time you have a jitter.

rgds,soso