Ok I have tons of stuff up for sale. I went in my garage today and looked around and was shocked at how much xbox and other gaming gear I just had laying around. So I am listing it all. My prices are all negotiable the prices listed are just what I think they might go for. Don't be afraid to lowball. I am just wanting to get this stuff out of my garage so will accept almost any offer just to get rid of it. Also everything is being sold as is, I am pretty sure everything works but I am not making any gurantees. Also shipping is not included unless noted otherwise. One last thing my paypal isn't working properly because I closed my bank account a few days ago and so now paypal isn't letting me receive any money. So I am only accepting Money Orders, Cashiers Checks or Checks right now. I am going to talk to my brother tomorrow and see if I can use his paypal. But if I can't then if you have good references I will ship the same day you send the money order/check.

Here are my references:
eBay Also just as a side note for the last 2 feedback on there. Those 2 people were from another country and the codes I sold them were only valid in the US as I stated in the auction and they just didn't read clearly.
Heatware


1.6 Mobo and HDD combo, no heatsinks, psu, controller ports, dvd drive. Nothing but the bare mobo and hdd. - $40


1.6 PSU - $15
Western Digital Xbox HDD (Can be unlocked here) - $5
Seagate Xbox HDD - $5


Blue case (not really sure what happened to this case, it has bondo and looks like someone spray painted the back) - $10



Slim Mini Case (it has been cut in both width and height and bondoed almost fits just needs a lot of sanding) - $15




Short Case (has random holes drilled in the top with a window outline) - $15



Skinnier case bottom (only the piece you see. Doesn't have top or front panel, not bondoed) - $5


Controller Ports on Right side front panel (Fiber glass was applied where the hole was on the left) - $10


Samsung SDG-605 Drive with window and painted blue - $10
Samsung SDG-605 Uncut Drive - $12


Grab bag - Get one of these free with each item purchased:
Original Xbox Fan - $3
(2) HDD Cradle - $1 each
DVD Cradle - $1
(2) Controller Ports - $3 each
CPU Heatsink (bent and cut ... not really sure what happened with it) - $1
GPU Heatsink - $1
DVD Tray Bezel - $1
Xecuter External Switch - $3
(2) Power/Eject Button - $1
Xbox Jewel (looks like someone tried cleaning it with a dremel) - $1
Power Eject Button PCB - $3


I also have the following games but I forgot to take pictures of them I have never played any of these, just found them in the garage:
Splinter Cell - Looks almost new - $4
MLB SlugFest 2003 - really light scratches but theres a lot of them - $2
Speed Kings - really light scratches but theres a lot of them - $2
NHL 2003 - Looks almost new - $4
Burnout 2 - really light scratches but theres a lot of them - $2


And now to the almighty custom made oak case. I made this case out of nice oak wood, it is unstained, all the edges are mitered. Never got around to finishing this, it still needs quite a few holes made. It could easily fit 2 xbox's inside of it, this thing is massive. Not gonna put a price on this, just make an offer.

Bump

DVD Drives Pending

Bump. Someone buy my stuff. If your afraid of my prices name a lower price. I will take almost any offer. Just need to get this stuff out of the garage.

need a dvd rom, got one?? how much

The prices are listed in the first post DVD drives are $10-$12 + shipping

so 15 shipped? what does uncut mean?

Well it depends where I am shipping it to. PM me. And uncut means uncut, look at the picture you'll understand. The cut one has a window unlike the cut one.

Bump

The 1.6 board is known to be working? I'm interested if it does and the drive is matching and locked, I want it for softmod so an unlocked drive is no good to me.
Also it's late here, and I can't quite make it out (Am I getting old?), those are Samsung RAM chips right? Not Hynix? I really don't want a B.
If all is good, I'll drop you a PM.

Yes whenever I first got it I plugged it in to make sure it worked and it did and then I put it in a box in the garage and was going to use it on a slimbox but never finished it. And its never been modded so it should be locked as far as I know, it booted up just fine to the retail dash. And yes they are samsung chips

Dvd drives work? If so pm me with total price each shipped to 44473 thanks

Updated list

1.6 Mobo and HDD combo, no heatsinks, psu, controller ports, dvd drive. Nothing but the bare mobo and hdd. - $40

1.6 PSU - $15
Western Digital Xbox HDD (Can be unlocked here) - $5
Seagate Xbox HDD - $5

Blue case (not really sure what happened to this case, it has bondo and looks like someone spray painted the back) - $10

Slim Mini Case (it has been cut in both width and height and bondoed almost fits just needs a lot of sanding) - $15

Short Case (has random holes drilled in the top with a window outline) - $15

Skinnier case bottom (only the piece you see. Doesn't have top or front panel, not bondoed) - $5

Controller Ports on Right side front panel (Fiber glass was applied where the hole was on the left) - $10

Samsung SDG-605 Drive with window and painted blue - $10 SOLD
Samsung SDG-605 Uncut Drive - $12 SOLD

Grab bag - Get one of these free with each item purchased:
Original Xbox Fan - $3
(2) HDD Cradle - $1 each
DVD Cradle - $1
(2) Controller Ports - $3 each
CPU Heatsink (bent and cut ... not really sure what happened with it) - $1
GPU Heatsink - $1
DVD Tray Bezel - $1 SOLD
Xecuter External Switch - $3
(2) Power/Eject Button - $1
Xbox Jewel (looks like someone tried cleaning it with a dremel) - $1
Power Eject Button PCB - $3

I also have the following games but I forgot to take pictures of them I have never played any of these, just found them in the garage:
Splinter Cell - Looks almost new - $4
MLB SlugFest 2003 - really light scratches but theres a lot of them - $2
Speed Kings - really light scratches but theres a lot of them - $2
NHL 2003 - Looks almost new - $4 SOLD
Burnout 2 - really light scratches but theres a lot of them - $2


And now to the almighty custom made oak case. I made this case out of nice oak wood, it is unstained, all the edges are mitered. Never got around to finishing this, it still needs quite a few holes made. It could easily fit 2 xbox's inside of it, this thing is massive. Not gonna put a price on this, just make an offer.

Bump!

bump

bump