I have this problem burning games lately where when I burn using CloneCd, one game will work and one game wont.

I have a good system,
AMD 6000+ X2
2 GB of ram
Pioneer 111d 1.23 IDE
... on the other ide port on the cable im using a ide hard drive i dont know if that might be the reason, sharing an ide cable with a dvd rw drive and a hard drive.

I also tried using IMGBURN and the same thing happens one will work and one doesnt.

Oh yeah and media isnt a problem because this happens to verbatim media too, one will work and one doesnt.

Also I dont have a another 360 to try out the non working games to see if they will work on there.

Any suggestions?

Thanks

id suggest moving the HDD IDE Drive to a separate channel from the burner and post back.

you do have two working IDE channels, correct?

edit: also make sure the device is set to DMA if available.

my motherboard only has one IDE Port.

I have a Sata drive with my OS on it, so disconnected the IDE Hard Drive wont be a problem,
I will disconnect the hard drive and try re burning a game tomorrow.

I forgot to mention that in IMGBURN I verified both burns on vebatim media and others such as memorex and ritek yet it doesnt work.

Ill post tomorrow my results. thanks