I have a 360, that i did the 9 volt mod on, but the solder point i used causes the 360 to RROD. Can somebody make a detailed picture of the board showing the 9v solder points please? Thanks in advance.
(This is the 9v point Pic)
(credit to grim187 for the pic)
Full Version: 9v Solder Points?
Scenyx Entertainment Community > Xbox360 Forums > Xbox360 Hardware Forums > Xbox360 General / Hardware Chat
i didnt think that there were on 9v power sources, but i could be wrong. anyways back to your problem. when i 9v my 360, i soldered the positive wire to 12v and the negative to 3.3v. this gives u the difference of 8.7 which is close 9v.
you can find all the good power sources here ---> Power sources (credits to RDC of course)
hope this helps mate
you can find all the good power sources here ---> Power sources (credits to RDC of course)
hope this helps mate
QUOTE(josiah1992 @ Aug 18 2008, 08:37 PM) 
i didnt think that there were on 9v power sources, but i could be wrong. anyways back to your problem. when i 9v my 360, i soldered the positive wire to 12v and the negative to 3.3v. this gives u the difference of 8.7 which is close 9v.
you can find all the good power sources here ---> Power sources (credits to RDC of course)
hope this helps mate
Could i have a pic? I'm kind of a noob, and it would really help.
This is a "lo-fi" version of our main content. To view the full version with more information, formatting and images, please click here.