QUOTE(Kyleg001 @ Apr 14 2009, 01:29 PM)

I know this is old, but if someone runs across it, You can tap 12 volt switched power directly from the PSU mobo connector there are solder points to the front (NEG) and back (POS) of this connector. 5V constant power can be drawn from the 5 wire (3 wire newer model) front connector on the PSU. From right to left the pin out is
1 = 12V power on/off(don't mess with!)
2 = 5V return
3 = 5V return
4 = +5V
5 = +5V
*Always test pinouts for yourself! before using. My experiences may be different from your hardware configuration.
thanks for that! cant wait to add some leds to my PS3