Okay, So I have the Xenium, it's been working fine.
I moved a few weeks ago, and now when I turn my xbox on, it reboots twice and then on, but nothing happens.
I get Red+Green in the front.
My Xenium has a solid red light the whole time.
If I pull the xenium out (even leaving the solderless adapter screwed in)
the xbox turns on fine to the microsoft dashboard.
Put the xenium back in = FRAG again.
I've tried researching but I couldn't find what problems (or rather, solutions) corresponded directly to my problem.
Full Version: Solderless Frag When In
Man I know exactly how you feel...my xhip decided to just stop working too. I was playing Halo and reset my Xbox...then it didn't boot. Now it's stuck in FRAG...my only option it looks like is to get another chip...unless I find the problem
check and make sure the solderless adapter is seated correct
I had the same exact issue...what fixed it for me was I placed my modchip in recovery mode(flipping switch on chip) and then I created an iso CD with the 2.3.1 ( XOS_2_3_1_Recovery.iso to be exact) Xenium on it...After restarting the Xbox with the CD already in , the XOS should be reloaded and the xbox should reboot. Next, I took my modchip out of recovery mode and all was well from there..Apparently the XOS got corrupted even the my BIOS that I had stored in one of the memory banks was just fine. Anyway, hope that helps..
Okay, So I have the Xenium, it's been working fine.
I moved a few weeks ago, and now when I turn my xbox on, it reboots twice and then on, but nothing happens.
I get Red+Green in the front.
My Xenium has a solid red light the whole time.
If I pull the xenium out (even leaving the solderless adapter screwed in)
the xbox turns on fine to the microsoft dashboard.
Put the xenium back in = FRAG again.
I've tried researching but I couldn't find what problems (or rather, solutions) corresponded directly to my problem.
QUOTE(Royal2000H @ Oct 13 2008, 06:37 AM) 
Okay, So I have the Xenium, it's been working fine.
I moved a few weeks ago, and now when I turn my xbox on, it reboots twice and then on, but nothing happens.
I get Red+Green in the front.
My Xenium has a solid red light the whole time.
If I pull the xenium out (even leaving the solderless adapter screwed in)
the xbox turns on fine to the microsoft dashboard.
Put the xenium back in = FRAG again.
I've tried researching but I couldn't find what problems (or rather, solutions) corresponded directly to my problem.
I have a solderless xenium (ice?) installed- it used to boot to the evox/avalaunch bios, but something happened and now it only boots to error 16. I recently became able to get into the xenium bios through the eject button start trick. When I flip it into recovery mode, it FRAGS, and even my bios dvd will not work. I had the opposite problem with another (soldered) xenium, except it fragged when NOT in recovery mode. I believe it is installed properly, as the leds all work, it used to go into the bios all fine but would not run any software- it just freezes at a blank screen.
is there a different bios disc i need to create, because i used the solder-older-xenium disc to "fix" the solderless 'box= which did not work. i also tried useing xboxhdm to fix the error 16, but no success.
is there a different bios disc i need to create, because i used the solder-older-xenium disc to "fix" the solderless 'box= which did not work. i also tried useing xboxhdm to fix the error 16, but no success.
This is a "lo-fi" version of our main content. To view the full version with more information, formatting and images, please click here.