Have some problems wiht XBOX360 flashing. First i searched for all manuals and few hours studied them all + found in forums few success stories, but without detailed information, also in dosflash txt found that it supports ICH9 and ICH9M ctrlrs, so it could work with my ICH9R.
So, i have computer with ICH9R controller in NATIVE mode and RAID mode and with Windows Vista installed, also i have:
(Downloaded with AutoXBins)
iPrep 101 v0.0.6.2 Beta
updated DosFlash v1.6
updated FirmTool v1.2
BenQ hacked firmware v1.41
I made bootable USB, then wrote from sysinfo tool I/O Port numbers 3428, turned off PC, disconnected all HDDs, CD, then connected sata cable to Sata port 0 and xbox dvd drive.( xbox is turned off, av cable in, dvd have power cord in) Turned pc on, in bios configured controller in NATIVE but in ACHI mode. (there was RAID mode before). Then booted with USB, got in iPrep tool then writed comand to read/dump original flash, then after some seconds got error, that there isn't original flash in folder.....Got this error few times..
Then i tried with dosflash tool manually. Tool cant found any drive attached to controller...
Cant buy via chip card atm, will have too long wait to my country and dont have so much time
Maybe someone could help me with some advice ? What to do now or what should i try next ?