Wondering if there is a way to change the colour of the LEDs around the eject button in the evox.ini?
I saw something like this whilst searching on google, but couldn't find more on this topic, I know Avalaunch, and XBMC have this feature so i think could be an option.
Thanks.

There isn't a way in Evox to do this. Depending on how you are modded, you can do it.

if you want to keep evox their is a hardware way of doing this as shown int he tutorial here:

http://www.xbox-scene.com/articles/front-led.php

you don't have to take out the controller ports though if you take just take out the power led's power cord first and then all you have to do is pop out the front of the case as it shows in the tutorial and then switch the wires.

P.S. sorry that last part about the front panel is only for mobos later than v1.0 if you have a v1.1 to 1.6b version the controller ports are attached right into the motherboard itself.

Hope this helps, and don't hold me responsible if you mess up just BE CAREFUL.

oh and btw this is the method I used and it worked out just fine.