360 Modification Disc v1.51 Posted by XanTium | March 7 15:57 EST | News Category: Xbox360

FrostyTheSnowman released a new version of his 360 Modification Disc. From the readme: [QUOTE] Features: - Complete Modding Solution for Samsung/BenQ/Lite-On - iXtreme v1.51 (12x) Firmware - Supports Samsung TS-H943 - Supports BenQ VAD6038 - Supports Lite-On DG-16D2S - Supports Previously Modded Drives - Supports Previously Spoofed Drives - 100% DOS Based Dumping & Flashing - Supports FAT32 & NTFS Filesystems (WinXP/Vista 32-Bit & 64-Bit) - Fully Automatic Dumping & Flashing - Step-by-Step Instructions - Backup of all drive-related files to HDD Changes in v1.51: - Updated all firmware to iXtreme v1.51 - 100% Support for all PC SATA & IDE DVD-ROM drives Changes in v1.5 Revision 2: - Improved dumping/flashing speeds for BenQ/Samsung drives - Added 'user firmware dump verification' prompt to prevent possible BenQ bricking - Revised menus and more detailed drive flashing/dumping instructions [/QUOTE] Official Site: n/a, by FrostyTheSnowman Download: n/a (contains modified FWs) News-Source/Full Readme: xbins.org

Interesting, this might have saved me a lot of time flashing my Benq today if I could have been more patient, will definately try this on my next mod.

nice work ! i might try this.

Thank You for this

is there any hitachi 79fl support.

Im going to ask this very kindly and please do not hate...i've never been that sick and stumbled across this...i'd usually search and through the forum but im too messed up right now
Are these hacks Xbox Live safe?
and is it easy to flash (right from the disc) without opening the xbox...

there's no guarantee that you are xbox live safe...everytime you mod something you take the risk and should know the risk beforehand....

you still have to open the box mate

Usage:

- Make sure you have a VT6421 (or compatible) PCI SATA card installed in your PC

- Burn this ISO, and boot this disc in your PC

- Follow the prompts to mod any Samsung, BenQ, or Lite-On XBOX 360 DVD-ROM drive

- All firmware dumps, modified firmware, and other files related to the drive being
modified will be placed in the following directories on your 'C' drive:

Samsung TS-H943 - C:\SAMFILES

BenQ VAD6038 - C:\BENFILES

Lite-On DG-16D2S - C:\LONFILES


- Will the prompts tell you when to put the CK3 on or not? Not quite sure how this works?....

Yes, if you are modifying a Lite-On drive the prompts will tell you when to connect the CK3.

So I burned this and it does not automatically start into anything. I didn't have my Xbox hooked up so im assuming that the program needs to have you xbox connected to your pc through your via chipset and then it will start... Correct... Ive never used this befroe.

Thanks, Sonky

hi
if use IXtreme 1.5 xbox live wil soon banned ???
why need update always new IXtreme 1.51 and IXtreme 1.6 and above ??
like safe ??? to connect xbox live online ???
if i update lates IXtreme 1.51 then contiune xbox live online right like safe to banned ???

One of the reasons is that some of the newer games do not boot under 1.5 but under 1.51.

Hey frosty i got your new disc but there is no firmware files or bat files waz up wit dat?

It's a boot disc. You need to insert the disc into your PC, then reboot your PC, then boot into the disc and follow the instructions. The file structure of the disc resides in the boot sectors of the disc, and not in the normal Joilet file system. This is intentional, and is my new method for this release.

If you insert the disc into your PC with Windows running, all you will see is the Readme file, the Lite-On Serial Cable diagram, and the instructions to find your VT6421's port.

disc freezes after reading the firmware file from my benq drive.

used jungleflasher and everything worked as it should.

thank you for this

but generally speaking you wont get banned as long as your game stealth and kreon drive does pretty solid job. I had mine online for like forever(my system still works after like 3 years..never had a problem with it...)

anyway thanks to all for the hardwork. we really appropriate it. one thing left is taking care of the region lock problem. I almost bought a jap xbox 360 just to play raiden games lol..

so this will work on my already modded console without any backup files?(keys..etc)

cool - looks interesting! just bought a new 360 with lite-on and reading up on modding it now. CK3 is in the post, and i will give this a blast when it arrives. thanks!

Hi,

I was going to use the previous version of this disc but I use Jungleflasher and DOSFLASH to normally mod drives but the reason I was a bit unsure about this disc is that I use a USB cable with the CK3 Pro. From what I read in the previous version, it can only be used with a Serial cable and not USB. Is this still the case? I'm really keen on using this disc, which seems perfectly straight forward to use, especially for re-modding drives but do I need to use a serial cable instead of USB?

I use a VIA 6421 card and have a CK3 Pro with probe kit.

Thanks,

I used this today to update my Benq, absolutely no problem at all and literally only took minutes.

I know it mentions spoofing in the readme, but does this disc work (for example) with a Samsung MS28 which has been spoofed as a Liteon?

I currently have a Lite-On flashed with Ixtreme 1.5. Can I use this disc to upgrade to 1.51 without using a CK3?

dont know if this helps or applies to you but my disc was freezing when flashing my sam ms25 after reading the firmware (at the please reboot, press any key bit). then i reburnt it onto a dvd instead of cd and it worked first time. dont know why or if its just a coincidence, but i didnt change or do anything different apart from that

i am having the same problem. it reads/dumps the fw just fine. then it says Please Reboot your PC. Press any key to continue.
and thats it.. nothing else. when i press a key, nothing happens. i had this burnt to a cd-r, then i tried it on a dvd-r. same result both times.
am i doing something wrong? how can i get it to Flash?

edit.. i also noticed that the dumped firmware, called ORIG.bin, is only 60kb in size. should be 256kb, right? i did a few dumps to verify, each was 60kb...

many thanks frosty the snowman if had any doubts I need not have worried the easiest reflash ever 1.41 on my benq to 1.51 in minutes the most time consuming fact is taking the xbox apart the flash was very easy just follow the instructions to the letter and BINGO thanks once again FROSTY

I'm having a very similar problem but mine freezes after reading the banks and it says reading finished but then it freezes. It doesn't even come up with the reboot pc option. I did reboot the machine and I redone the process but it froze again at the same place.

Any ideas on this?

Glad to hear my disc has worked well for so many people!

As far as the people with freezing issues after dumping, try using my disc without your PC's HDD connected, it may solve the freezing issues. (Don't worry, my disc works just fine without an HDD, it just won't backup your firmware for later use)

This release makes my disc compatible with ALL PC SATA & IDE DVD-ROM drives, but my disc still has some known issues with certain SATA HDDs. (after dumping the firmware my disc immediately copies the dumped firmware over to your HDD, which can cause freezing with some SATA HDDs.)

Once again, if you are having freezing issues, try using my disc without your PC HDD attached, you should be fine. Although, if you have a spare IDE HDD laying around that you can use instead of your SATA HDD, that would be highly recommended instead of simply disconnecting your SATA HDD.

NOTE: Using an IDE HDD is a much better idea though, as using my disc without an HDD does introduce the possibility of bricks. I'm not saying your drive WILL brick, only that it is a possibility without an HDD.

em, i have a question, its the 1st time i am thinking of using this programe, i got a few question to ask, hope you guys can help me out.

i dun have a via VT6421 PCI SATA card, can i use my on board sata? its "NVIDIA nForce4 Intel Edition Serial ATA controller" just wondering is this ok to work with this? and i am using a lite-on with IX 1.5, but i dun have a ck3 or any tool for key extraction as i had someone done it for me, does this software do upgrades by auto detecting the dvd key via sata? sorry to ask so much, just wanted to comfirm before taking up risk hope fellow seniors and bro here can give me a hand, thanks in advance, and sorry for my bad english.

Hello Frosty
nice tool, really appreciate the work, got a quick question
the unlock procedure of the drive is handled too ? depending the firmware and the drive you have, it can be pretty different to get it in vendor mode .. Thx for the answer

Hey Frosty, fan of the disc having an issue though. I'm new to the forum but not new to flashing.... I've also read completely through this post as well as your original post for v1.5 post and tried everything with no luck still.... I can't make it passed the reading stage of the disc.

After getting through to steps 5 and 6 (of the orig. fw reading) is where I have trouble. I have tried all the different suggestions on DC power and reconnecting but none have worked and allowed my drive to read the orig fw.... the drive (benQ btw) goes from status 0xD1 when the drive is disconnected, then after waiting for 5-10 secs i reconnect power and the status flickers at 0xD2 without reading the fw.

Any suggestions from you guys would be greatly appreciated

Frosty,

Just to let you know I got it to work but I had to disconnect the Hard drive first as you recommended but what I was slightly concerned about was not being able to keep my saved firmware but a sacrifice I was willing to make. Also, I use an IDE drive anyway and not a SATA and only until I unplugged this did it start to work.

It worked immediately and I see no reason for it to go wrong at all if the Hard Drive is disconnected unless you are very careless. It was for a BENQ drive.

Anyway, the disc is the business and massive congratulations on an amazing tool. You're going to save me so many hours remodding drives.

Have you tried using an external power source instead of using your 360?

I personally use the XENO connectivity kit for my power source, but the Xecuter connectivity kit and the CK3 pro/CK3 lite also work very well.

I don't really recommend using your 360 as a power source, it tends to cause reading/flashing issues with Samsung and BenQ drives.



My disc handles all unlocking, reading, and flashing for all versions of the Samsung, BenQ, and Lite-On drives just fine as long as you are using a VIA VT6421 SATA card.



My disc cannot dump the Lite-On key information over SATA, it requires a serial cable to do it. You will need either a CK3 lite, CK3 pro, or you will need to make a homemade cable with the diagram provided on my disc.



Glad to hear that you got it working! Also note though, that if you choose not to use an HDD with my disc, you could also simply say 'no' instead of 'yes' at the NTFS4DOS prompt and it would do the same thing as disconnecting the HDD on your PC.

You see, the NTFS4DOS application is what actually loads support for your HDD in the first place, so if you say 'no' instead of 'yes' it will simply not load support for your HDD and would do essentially the same thing as disconnecting your HDD.

hi, Frosty i tied yout disc to flash a liteon that already has 1.5 on it. I finally get it done, thanks for your work.

but I have a few questions:
although i've got it working but i did fail a few times when flashing it. it freezed at flashing bank 0. waht could be wrong?

noticed a change betwee this version disc and your 1.5, it asks to wait for 5 seconds after switching off the drive when flashing but your 1.5 dsic does not ask for that. I never experience freezing issue with your 1.5 disc. is the 5 seconds wait very important in this version ?

Ugh. The disc just messed up my drive or something.

For some reason, it froze my PC after erasing the drive. I could not press any key to continue. Had to reboot. Theres no 'Restart the process using an already extracted orig.bin'.

Had to find the commands to manually flash the ixtreme.bin... found 12 write errors.
Booted up my 360, wouldn't read a backup, would play a movie though.

Tried to reflash orig.bin, found 57 write errors. Didn't bother testing. Reflashed the ixtreme.bin found 707 write errors.

Still doesn't read backups.


I can't even seem to copy the orig.bin and ixtreme.bins, because Win7 created a 200MB partition for system use... NTFS4DOS decided to make that C. Whenever I tried to copy files from C: to another drive it would freeze up my system.

I should have my very first stock orig.bin somewhere on a drive. But can anyone help me w/ those write errors occuring?

No, not really, just some added detail in the menu to make up for weird timing on some PCs.

The 5 seconds that was added in the BenQ & Lite-On sections is just there for better timing, but is not necessary on most PCs.

Also, as far as the freezing goes, MS-DOS has been known to freeze up at weird times on some newer motherboards, this may be the issue in your case. The older your motherboard the better with my disc.



My disc has not been tested using Windows 7 partitions, which is why they are not listed as being supported on my disc.

Try using a Linux Live CD to retrieve your ORIG.BIN and IXTREME.BIN files off that partition.

Also, it's probably getting write errors on your drive because you are using a BenQ or Lite-On drive, which needs to be erased first before you flash it manually.

I was able to retrieve the bins.
It is a BenQ.
Mobo is about a year old. Gigabyte 780G-based.
VIA card is the standard Syba from newegg one.


I know at least one time I did do an erase before flashing. The problem is, after I erase, I lose control. I have to reboot. Then I flashed. And still get write errors. Also, your disc froze after it erased. So I just rebooted. I'm assuming this means the drive is still erased? . Then just flashed and got only 12 errors, but didn't work.


Shoulda used iPrep (if its still around ?)


I did manage to read the firmware on the drive at one point, and when I was able to retrieve all the BINs, I examined it and it had a COMPLETELY different drive key than ORIG.BIN and IXTREME.BIN.

But I'm done messing with it tonight. Ugh..if only it wasn't such a major update. I was fine w/ 1.4 (I make all my own backups from originals).




btw: concerning timing. I just wait til the status stops flashing from 0xD1/0x51. I notice the Xbox360 stays on for about 10s after pressing hte power button. but when Status stops flashing, thats when it seems to be totally off. Then I turn it back on, and it does whatever its needing to do (Read/Erase/Write).

There's the whole problem right there, you are using your 360 as a power source for the drive.

As said many times before, I do not recommend using your 360 as a power source for your drive when using my disc.

MS-DOS is all about timing. My disc is built to have things happen at certain times, which the 360 fouls up when being used as the power source. Please use either a XENO Connectivity Kit, an Xecuter Connectivity Kit, a CK3, or a homebuilt power connector, please avoid using your 360 as a power source for the drive.

Oh well... Should definately have used iPrep then (never had a problem using a 360 as a power source)


Thanks anyway. Hopefully I can recover...

Update!

It seems that the freezing issues many users are experiencing is related to the NTFS4DOS application, which controls NTFS support on my disc.

I am currently testing another freeware DOS/NTFS solution, expect an updated version of my disc within 24 hours that should solve any freezing issues.

Hey. I would greatly appreciate it if somebody could help me with my situation. Thanks in advance.

I usually go to get my xbox modded by a professional modder. I've had it done a couple of times now, and I think it's time I learn to do it myself, and save the hassle of traveling to their house.

The last time I had it modded was around 1-2 weeks ago, slightly before the new video wave came out in these games. I got it modded to 1.5. I believe my drive is a lite-on (Arcade system bought brand-new around Christmas time last year). Anyway, I saw him do some soldering and what-not, and flash it to 1.5.

What do I need to do to upgrade my 360 to 1.51. Is it easy enough to "upgrade" or will I need to solder things. I don't have any clue as to what this "key" business is too. But I assume that's been done since my modder flashed my xbox to 1.5?

I really want to start doing this for myself, and I would take on board any help I can get.

Thank you.

Anyone able to answer this...



Thanks

hi frosty, thanks for the promt and helpful reply, really appreciate ur kindness, just want to ask another thing, am i able to use like jungle flasher to extract my already flashed ix 1.5 for the dvd key and use it with this noob friendly disc u made for? thanks..

hi frosty after a straight forward benq flash yesterday which went well the next xbox I wish to attempt is a benq spoofed as a hitachi do I just flash following the benq method as normal ?
or will the spoofed drive not work with your boot disc ?

thanks in advance great mod disc !

Any chance of quick confirmation if this works with ICH9 chipset?

I'd like to try this out and just experiment with it but no sense in trying if ICH9 isn't compatible.

Thanks guys.

To answer Nismo and Logicwatch's questions:

Yes, my disc automatically copies over all necessary spoofing information on already spoofed and modified drives.

Meaning that any spoofed drive with older firmware will still be spoofed after being updated using my disc.

ohh u also using 1.5 xbox live online stil ruming ??? naver banned right ?
who using 1.5 who got xbox live banned ????

well, i was able to recover using iPrep.

Your disc is great in theory(as is JungleFlash), but it just seems theres too many bugs or restrictions.

Thanks anyway.

hi frosty thanks for clearing that up
but obviously thats for ex. benq spoofed as a hitachi ?

NOT ORIGINAL hitachi spoofed as another hitachi ? ( IF THATS EVEN POSSIBLE ? )
Its a shame your great boot disc couldnt do hitachis as I really hate flashing them

thanks for your support

Thanks