I've been trying to flash my Lite-on 16D2S for about 3 days now. Let me start off with what really happened.
Firstly I build a homemade spear (I removed the pin 3 from the power cable to dvd drive, so as a result the dvd tray remains half open) .. followed the instructions posted on this forum and got the key via DVDkey32. It returned as a good key.
I opened up Jungle Flasher, did all that was required like loaded the Dummy.bin, Loaded the ixtreme(liteon), spoofed on target and created the modified firmware(Lite_CFW.bin) n then went over to MTKFlash.
The moment I clicked on "Liteon-Erase"...i got 2 warnings and went ahead. After a while, I got a message sayin tat the intro failed or something and then the comp hung up...Tried it for another 2-3 times but no luck..Tried it in DosFlash32 but it couldnt recognize the drive...
So i went about creating a boot Cd with dosflash.exe(1.7), dosflash.typ, l-o-eras.exe and Lite_CFW.bin (since my pc doesnt support USB boot ) and booted to DOS.
At prompt I ran l-o-eras.exe B800 (B800 being my SATA port)...tried it till it displayed FFF72.
With the tray still half open I switched off n back on the Xbox. There are only 2 cables running to the lite-on...one from my VIA 6241 and the other the DVD power cable with the open/close pin taken off so the tray wouldn't close for every power cycle.
Then I typed "DosFlash"..there came a list of drives including my Liteon. There was a question when you want to resend the information etc....i tried for both y and n but it showed my Flash type as "Unknown" and Flash Size as 0kb.
I went about typing E....it displayed "Unknown chip"...then a "LITEON E"...it showed "Erasing..." and then "Erasing Complete."
Futhermore, I typed "dosflash" again...There was again a question when you want to resend the information etc....i again tried for both y and n but it showed my Flash type as "Unknown" and Flash Size as 0kb.
I went about typing W....it displayed "Unknown chip"...then a "LITEON W"...showed an "Invalid choice" message.
What am I doing wrong? Should I be using the probe on R707 for the flashing process too or something? or should the lite-on tray be closed during the flashing process(i mean all connected the the xbox 360 power)? Why exactly do people use CK3 in the flashing process?
Please do help ...