Ok, this is getting weird and aggrevating. If anyone can offer some suggestions, it would be appreciated.
I have a spare Hitachi 079 - not bricked (yet!) that seems it has been spoofed to look like a Sammy ms28. Jungle Flasher (Both 1.64 and 1.51) is telling me this.
I can send mode B fine in JungleFlasher but my computer will NOT recognize the drive. So, I figured I would go ahead and use Firmware toolbox (4.6 and 4.8) to try and restore the Hitachi to original firmware. However, when I go to Tools --> DirectDrive Flash -->
All the options are Greyed out. The drive is in modeB because it takes two clicks of the eject button (ck3 tool) to eject the tray.
Also, after sending ModeB, the drive does NOT show up in My Computer, and I cannot play the 79Unlock Disk.
I also tried to use iPrep to read the drive being that it is showing up as a Samsung, however, that will not work because you have to power off and on the drive, which takes it out of ModeB. I tried it anyway, and it fails time and time again on the Vendor Intro.
Also, I tried in JungleFlasher to send a Sammy Unlock doing it both as Stock and with the tray half open, and again, it fails on the Vendor Intro.
So, now that you got the low-down on the prob, I need to do the following:
1) Get this drive recognizable in My Computer
2) Restore the Drive back to original firmware
a) I am sure once the drive is recognized by Windows, #2 will be able to be done as normal.