alright ive spent all night trying to do this with with iprep and searched countlessly to find a good tutorial the only one i found was with i prep and its not working for me. i also tried dos flash and it would not reconize my drive. any way to flash the samsung ms28 with jungleflasher? sorry if i sound like an idiot im tired as hell its quarter to 4 am.
thanks for any help in advance
Full Version: Need Help Flashing Ms28 With 0800
Scenyx Entertainment Community > Xbox360 Forums > Xbox360 Hardware Forums > Xbox360 Backup Forum - DVD DL help / ISO Building
QUOTE(tense_lion @ Nov 5 2009, 12:43 AM) 
alright ive spent all night trying to do this with with iprep and searched countlessly to find a good tutorial the only one i found was with i prep and its not working for me. i also tried dos flash and it would not reconize my drive. any way to flash the samsung ms28 with jungleflasher? sorry if i sound like an idiot im tired as hell its quarter to 4 am.
thanks for any help in advance
This Question should be in > Xbox 360 Hacking Forums>> Technical DVD-ROM and Modified DVD Firmware Forum Read JungleFlasher's Tutorial and JungleFlasher TroubleShooting Guide PDF on there site hope this helps
its like 4am where I live lol
http://forums.xbox-scene.com/index.php?showtopic=669731
good info here.
basically, in JF you unlock sammy, load 800 firmware in firmware tool section then flash.
good info here.
basically, in JF you unlock sammy, load 800 firmware in firmware tool section then flash.
thanks for all the help! really appreciate it beyond belief, one quick question tho because i read the thread you referred me to and there using xtrm0800.bin should i flash that to my sammy with jf or use the ix1.6 0800 firmware?
QUOTE(tense_lion @ Nov 5 2009, 06:02 PM)
thanks for all the help! really appreciate it beyond belief, one quick question tho because i read the thread you referred me to and there using xtrm0800.bin should i flash that to my sammy with jf or use the ix1.6 0800 firmware?
There are two versions of Firmware one for playing your games that's iXtreme 1.61 and ix16-0800 being a dedicated "ripping" drive "Update" A new version (v1.61) of the iXtreme DVD Firmware for both Samsung and BenQ DVD drives has been released. A Lite-on version is still in development and will be released later (NO ETA). C4eva Excellent job man
Yes you can flash your drive with jungleflasher get the new update before flashing on there site hope this helps
Note: I used JF on a Benq drive not a sammy so if anything happens I cant help but can give you a push in the right direction read Jungleflashers PDF and TroubleShooting Guide before flashing anything Get that Original DVDkey off your drive before doing a erase or flashing and Don't Autoload the firmware loaded it your self Jungleflashers PDF is going to tell you to Don't and spoof it your self.
thanks again for all the help, but i forgot to mention something important this drive is from a dead 360 so i want to make it my permanent ripping drive. so still wondering should i flash ix16-0800 or xtrm0800 and does it even matter. thanks as always.
QUOTE
Team HyperX Presents IXtreme 1.6 0800 firmware for Benq, Samsung and Liteon drives
IXtreme fw for Benq, Samsung and Liteon drives!
Features
--------
-Common API designed for easier application use!
-Support for SS V2!
-Direct 0800 mode for game dumping including SS v2!
This firmware is =NOT FOR USE IN A CONSOLE= and is provided
with the intended use of being in a dedicated "ripping" drive.
This means:
a. Does not need your DVD key,
b. Does not need spoofing as another drive,
c. Does not need to use the tray half open and
d. Does not need to use the activate.iso to use this firmware on the pc.
More Info
---------
SS v2 supports multiple timing samples for challenges type 5 and 7, storing them in the SS. This is a pre-requisite for SS v3 which has support for the so called AP2.5 check. Since this has never been used or may never be used by MS we will adopt a wait and see approach and continue to monitor for its usage.
IXtreme fw for Benq, Samsung and Liteon drives!
Features
--------
-Common API designed for easier application use!
-Support for SS V2!
-Direct 0800 mode for game dumping including SS v2!
This firmware is =NOT FOR USE IN A CONSOLE= and is provided
with the intended use of being in a dedicated "ripping" drive.
This means:
a. Does not need your DVD key,
b. Does not need spoofing as another drive,
c. Does not need to use the tray half open and
d. Does not need to use the activate.iso to use this firmware on the pc.
More Info
---------
SS v2 supports multiple timing samples for challenges type 5 and 7, storing them in the SS. This is a pre-requisite for SS v3 which has support for the so called AP2.5 check. Since this has never been used or may never be used by MS we will adopt a wait and see approach and continue to monitor for its usage.
thats the READ ME, get it from #xbins
alright well ill go with the ix1.6 0800 firmware in that case. cant flash until tomorrow now but when i do i'll post results.
QUOTE(chorizo1 @ Nov 5 2009, 07:22 PM)
thats the READ ME, get it from #xbins
This means:
a. Does not need your DVD key,
b. Does not need spoofing as another drive,
c. Does not need to use the tray half open and
d. Does not need to use the activate.iso to use this firmware on the pc.
After I had my Benq flashed with IXtreme 1.6 then turned it in a dedicated "ripping" drive with 0800 firmware I needed to put the drive in Vendor Mode use the tray half open to get JF to see it, JF ver was 1.66 beta with ICH10R chip set no VIA and just did the spoofing too no problems backing up my games with or with out it worked for me on my benq but like I said I had ix1.6 on it at the time hope this helps
This is a "lo-fi" version of our main content. To view the full version with more information, formatting and images, please click here.