NandPro 2.0c *Update: 2.0d* Posted by XanTium | February 8 21:37 EST | News Category: Xbox360

A new version of NandPro(info) has been released, the original cmd-line tool that allows you to read/flash the Xbox360 NAND via LTP or USB: What's new/fixed: * Bit settling verify feature added for LPT reading * Add support for Jasper16a * Improved detection for virtual nand device, fixes some problems with writing to vnand. * Always corrects the ECC bytes (but not SPARE), even in raw mode ie: A raw file that has been hex edited can simply be flashed with -w * Added command line swithces %r will read SPARE data only, 16 bytes per block @w will write RAW file, while correcting block numbers Can "force" a flash config on command line by appending :HexFlashConfig *update* 2.0d has been released. What's new/fixed: * For compatibility purposes -w does not calculate ECC * Raw files are flashed pure using -w. To correct ECC errors use *w instead ie: A raw file that has been hex edited can simply be flashed with *w Official Site: By Tiros at free60.org (thx to WarriorSan for the news) Download: here

Cheers, just need X64 support now and i can get rid of my 32bit vista all together

NandPro20c has been removed pending a small correction to be released soon.

(Dont use download link on main page until XanTium has had a chance to update.)

http://nds.cmamod.com/x360/NandPro_driver_w32_x64.zip
and
http://forums.xbox-scene.com/index.php?showtopic=698049

* Add support for Jasper16a

I wonder what the improvements are, because I already xbr'ed my 2 16a jaspers and are fine

same i have done 3 jasper16a all worked grate

wish i saw this yesterday because i would have grabbed the 2.0b version, didn't see this until just now tho. but i ended up using the 2.0c version to dump my nand and uncripple the hdd on my falcon using win xp sp3. two identical dumps w/ no bad blocks. worked fine.

will hold off on using it to flash xbr to my jasper16 tho until new release just as a precaution

Hi team,
can u please tell me, what is a jasper16a (a new release of motherbord?)
With this nand can i set a xbreboot on my console (if i already have a dash 7xxx)?

Version 2.0d has been released.

any one have link to the new one?

edit:

NM here is a link

http://rapidshare.com/files/348385156/NandPro20d.rar

and for the people who dont like rapids**t enjoy

NandPro20D.rar

Edit: Still using 20.b, the new one is confusing LOL.

why is it confusing just use it the same as nandpro2.0b dont you?

Just used it on 4x Jaser16a's and all good! Thanks for the update and fix! Much appreciated! I'm gonna bank with these consoles so is there a donation link anywhere?

I tried using nandpro D to flash the rawkv.binto xbr and it get a "could not open Virtual Nand Device File.XBR512.bin"

I use nandpro B and it works just fine... it there a different command when using the XBR? Read the rawkv.bin form the nand works fine with version D but not writing to xbr.

explame of what I mean.
nandpro newjasper64.bin: -r64 rawkv.bin 1 1
nandpro newjasper64.bin: -r64 rawconfig.bin EF7 2

works with verison B and D
But
nandpro XBR512.bin: -w64 rawkv.bin 1 1
nandpro XBR512.bin: -w64 rawconfig.bin EF7 2
give me "could not open Virtual Nand Device File.XBR512.bin" Using version D

Using version B it works fine...

Guys,
Please tell me. It is very important

it means that you have a 16MB jasper with the new southbridge.
If nandpro gave you FlashConfig:00023010 while reading, then you need to flash XBR_Jasper16a_8955_3.rar

Flashed one 16a and two 512MB nwe southbridge Jaspers with
the NandPro 2.0b.. No issues, worked like a charm.

Is nandpro d compatible with the usb pic flasher?

i couldnt see y it wouldnt work and it detects my usb dev so i would say it is compatible

Does that mean i can use USB cable instead of printer cable. I have a new pc without any printer ports.
Is it possible to use the USB cable?
i am having trouble with printer cable as my pc dosen't have a printer port.

YES. I have this problem too with 512MB and nandpro D.
nandpro B is fine.

I had the same problem . B is just working fine on my 512mb nand

Anyone have nandpro20e or can complete the one on xbins?

Nandpro v2.0e :