This chip will flash with EvolutionX and Raincoat. No special instructions required.
Flash = 0x20b0,"ST M29F002T/NT/BT/BNT",0x40000
Flash = 0x2034,"ST M29F002B/BB",0x40000
Flash = 0x20d3,"ST M29F200BT",0x40000
Flash = 0x20d4,"ST M29F200BB",0x40000
Flash = 0x20e2,"ST M29F040 series",0x80000
Flash = 0x20d5,"ST M29F400T/BT",0x80000
Flash = 0x20d6,"ST M29F400B/BB",0x80000
Flash = 0x20f1,"ST M29F080 series",0x100000
Flash = 0x20ec,"ST M29F800DT",0x100000
Flash = 0x2058,"ST M29F800DB",0x100000
if so. then you need to add that code to your evox.ini file
no need for slayers. just grab a copy of evox and install it to the hard drive. but if you insist on using slayers you need to get 2.7 as its the latest. and open it up with qwix to edit the evox ini and put that code in there. also edit the IP address to your xboxs IP (in case you want ftp). also put your BIOS in the BIOS folder. then use qwix to make it back into an xiso.
are the points you need to jumper. if you arent good at soldering you can use a conductive pen (10 bucks at radio shack) to join them