QUOTE(cabb360 @ Apr 19 2010, 02:13 PM)
What kind of flux u using wire and what watt solderig iron I used a 20 watt with 30 awg kayner wire with some liquid flux I was using radio shack paste which wAs garbage.
Hi I am using a 20w iron with 30 awg kynar wire. the flux im using has been fine for doing work on the Liteon drives. And for doing the db1f1. I have j'tagged quite a few xbox's now and cant beleive i have been so stupid as to burn the board! I havent done that since my first one lol.
QUOTE(xpa12 @ Apr 19 2010, 03:02 PM)
Have you tried the underside of the board, or the top if you already tried the underside?http://img145.imageshack.us/img145/7457/reversejatg.jpg
Its not for xenon (but all you need to do is wire to the other points near the side of the motherboard instead of the ones shown) but the J1D2 wiring is the same on all boards
Thanks for the reply, but its actually the lpt connections im having problems with. Its the one below where the diode goes. it has a tiny trace running out from the southbridge and goes in between where the diode and the ground wire go to what i beleive is j1d2.3. Thanks