I did the following (disk orginal and softmod , used XBMC) :
I copy Gentoox.ShALLaX.Loader-v6.07 in Xbmc to E:\apps , and x2_4977.67_EC.bin to C:\bios, next I make jumper in board. (like this )


Uploaded with ImageShack.us

Next turn off Xbox and give Gentoox.ShALLaX.Loader-v6.07 , later advanced -> flash menu -> hdd flash and choose x2_4977.67_EC.bin and flash console (green bar is 100).

Consol automatic, turn off and turn on but http://www.youtube.com/watch?v=Ar9uK7NnnSI

How to fix it, Is she died ?

You've flashed a bad BIOS, and you now need to fit a chip.

When you fit a chip, flash a newer BIOS - X2.5035, or iND-BIOS.5003, or X2.4981, or Evox M8+.

"You've flashed a bad BIOS, and you now need to fit a chip." How should I do it ?

buy a modchip and install it using a guide for whatever modchip you end up buying

duoX2 is probably the cheapest one available these days

Unsure ? , because I give chip Alladin xt + 2 and xbox doesn`t work.

You have to provide more details. We are not mind readers

I don`t know what I have to write more. I was installed Alladin XT+2 and again http://www.youtube.com/watch?v=Ar9uK7NnnSI

To begin with, what bios did you flash to the Aladdin?

Bios to Aladdin is original.

Make sure you have the chip installed correctly, and that you are actually booting off the chip. Ground the d0 point and that will fore the xbox to boot from the chip if the chip is installed right. If the xbox still does not boot then the chip is probably installed wrong

most of the aladdins i've bought came with evox d.6 on them, its possible the bios on your aladdin is too old to support the 1.4

maybe , can flash with a PC

I gave Aladdin XT of auto boot ,and all working , how to do it now TSOP in board Xbox ?

The tsop in the xbox is messed up now you will have to leave the chip in.