I've tried running the Dashlaunch installer again, it says nothing needs updating and then prompts me to shut down the 360.
I've been trying this with Mass Effect 2 as I have a savefile just before the end, which makes you switch back to disc 1, all my games are in GoD format and on the internal HDD, here's my dashlaunch info_launch.ini and my diskswap multi.ini settings.
---Dashlaunch---
; launch.xex V2.0 config file
; parsed by simpleIni http://code.jellycan.com/simpleini/
; currently supported devices and paths:
; internal hard disk Hdd:\
; usb memory stick Usb:\
; memory unit Mu:\
; USB memory unit UsbMu:\
; big block NAND mu FlashMu:\
; CD/DVD Dvd:\ (not recommended to use this one)
; buttons can point to any xex, or any CON with default.xex in it on any of the above devices
; note that Right Bumper is ALWAYS default to return NXE
; if you want to assign an additional one, use the path Sfc:\dash.xex ie:
; BUT_A = Sfc:\dash.xex
; example entry
; Default = Hdd:\FreeStyle\default.xex
[QuickLaunchButtons]
BUT_A =
BUT_B =
BUT_X =
BUT_Y =
Start =
Back =
LBump =
; Default is what loads when you hold no buttons
; leave this blank if you want NXE as default
Default =
; example plugin entry
; plugin1 = Usb:\plugin\aplugin.xex
[Plugins]
plugin1 = Hdd:\swap.xex
plugin2 =
plugin3 =
plugin4 =
plugin5 =
[Settings]
; if true, brining up miniblade in NXE and then pressing Y will cause launch.xex to relaunch for you
; note you must release Y button then press desired QuickLaunchButtons after or use default item
; if not present default is TRUE
nxemini = true
; if true ping limit will be removed for system link play (thanks FBDev!)
; if not present default is FALSE
pingpatch = false
; if true (most) xbla will no longer need yaris patching (thanks mojobojo!)
; if not present default is FALSE
contpatch = false
; Normally when a fatal error occurs the xbox will just freeze, setting this to false will cause a reboot or powerdown
; setting to TRUE will also disable the unhandled exception filter which tries to intercept recoverable unhandled exceptions with exit to dash
; if not present default is FALSE
fatalfreeze = false
; when fatalfreeze is set to false, setting this to true will cause the box to reboot (hard reboot), setting it to false will instead have the box shut down
; note that this option does NOTHING when fatalfreeze is set to true
; if not present default is FALSE
fatalreboot = false
; when fatalfreeze is set to false and fatalreboot is set to true, setting this to true will cause the box to reboot (soft reboot) the way it was intended to
; ONLY set this to true if using blackaddr's reboot fix for SMC, else on reboot you will get E71 and corrupted dash/video/etc settings
; note that this option does NOTHING when fatalfreeze is set to true
; if not present default is FALSE
safereboot = false
; when set to true, it is possible to hold RB when launching a game to have the region that the game gets from xam spoofed
; if not present this is set to FALSE
regionspoof = false
; when regionspoof is true, you set your region here in hex, for examle devkit would be region = 0x7fff
; if not present but regionspoof is set to true, this is set to 0x7FFF
region = 0x7FFF
; when set to false, ejecting a dvd video or game returns you to your default item, set to true to auto exit to NXE
; if not present this is set to FALSE
dvdexitdash = false
; when set to false, using the exit item in an XBLA game returns you to your default item, set to true to exit to NXE arcade menu
; if not present this is set to FALSE
xblaexitdash = false
; when set to true, using miniblades system setting options will not exit to NXE
; if not present this is set to FALSE
nosysexit = false
; when set to false, xbox will be capable of finding system updaters
; if not present this is set to TRUE
noupdater = true
; when set to true, dash launch will put all debug strings out to uart
; if not present this is set to FALSE
debugout = false
; when set to false, dash launch will not attempt to handle last chance unhandled exceptions
; if set to false, exceptions will also no be dumped to the dumpfile
; if not present this is set to TRUE
exchandler = true
; by default this only dumps to UART, setting a file here will cause unhandled exception info to be dumped
; as text to a file. Same path restraints as the quick launch buttons.
; if exchandler is set to false, this option does nothing.
; note that this uses the first drive of the class found, so if you use usb: and have more than one usb device
; it may wind up on any of the usb devices depending on which was enumerated first. The path for the file is only
; checked on boot, so the device must be present at power on and at crash time for this to be effective
; ie: dumpfile = Usb:\crashlog.txt
dumpfile =
; this value sets the number of times that buttons are checked for on bootup, as well as how long it checks for buttons
; and thus extends the length of time the boot animation will be displayed onscreen
; 0x5A is approximately 6s window for button detection, 0x2A approximately 2s - if set too short auto profile login breaks
; if set too long other wonky things happen
; note this value is interpreted as hexidecimal, valid range is 0 to 0xFFFFFFFF
; if not set this value will be put to 0x2A (42)
bootdelay = 0x2A
; if set to true, this will block the console from resolving LIVE related dns
; if not set this value will be TRUE
liveblock = true
; if liveblock is set to true, this will block the console from resolving all MS related dns
; setting this to TRUE will also block apps like freestyle from accessing things like cover images
; if not set this value will be FALSE
livestrong = false
; all comments and fields in this file are optional, you can remove anything you don't need - section headers []
; are required for any used options under the section
; sorry for any double negatives
; njoy, cOz
It's the default, I just added the swap.xex in the plugins.
---Diskswapper---
; this ini has the same rules as launch.ini and must be placed on the root of a device
; paths are determined the same way (Usb/Hdd/etc) see dash launch sample ini for more info
; title ID is used for ini category (can be found in fsd, with xextool, the folder name built by iso2god/nxe install)
; use only numbers and small letters here
; only disks listed in the correct titleid category will be parsed from this ini
[454108df]
; dead space 2
; paths for GOD games must point at the root CON descriptor, and NOT end in a \
disk1 = Hdd:\Content\0000000000000000\454108DF\00007000\831BBD71B701B42512FF
disk2 = Hdd:\Content\0000000000000000\454108DF\00007000\B8605B3BAFB748ACD08A
[5454086c]
; LA Noire
disk1 = Hdd:\Content\0000000000000000\5454086C\00007000\D29C417A095AAB673BF5
disk2 = Hdd:\Content\0000000000000000\5454086C\00007000\31166B60CF4D89293E1F
disk3 = Hdd:\Content\0000000000000000\5454086C\00007000\0EC6A58DDE77D05848D9
[454108ce]
; Mass Effect 2
disk1 = Hdd:\Content\0000000000000000\454108CE\00007000\2AB71BD89DC58E8FB82F
disk2 = Hdd:\Content\0000000000000000\454108CE\00007000\651DFCA81463C5F0E6B4
Can anyone see what I'm doing wrong?
Both Dashlaunch and Diskswapper lists internal HDD as Hdd:\, tho in Xexmenu and my FTP it's Hdd1. Though, I tried it with all the paths in both .inis as Hdd1:\ and it also did not work.