why a few, do we have to leave them in there?

with the nandx you remove that but leave the diodes installed



why are peeps so concerned with xen who cares, that board is horrible

not to mention it lacks hdmi so its old technology, repairing xen boards is sometimes a waste of time for me unless i replace the gpu

YES! Same questions asked over and over again.
You have to leave the board in the box. This is not the "original" JTAG-hack.

The board stays in place for now untill a modchip comes out that is more compact and pre programmed, this is no noob friendly hack so wont take off for the average diyer till an easier solution comes out.

Wow,

there are now only 1680 left. Someone has got plans

thanks to all those involved ...
I see people dancing in the street ...


Now if I could jsut reuse some of the old Xbox 1 mod chips with xilinx chips I have collecting dust.
Xenium and clones

Yay!?!?! I think...

so many mixed feelings about this ! It's good in most ways, but I'm worried this will screw-up live, just around the time all the year's top games are about to come-out! I kinda missed this as I've had my head buried in Deus Ex for the last week... This hack is very clever! But I think I may already know a way they might patch it.... But we will see.. Most likely end-up being the new front of cat&mouse... Kinda glad now that I didn't go too far don the other path.. (which no-doubt will still have a role to play, just not as big ...)

Timning is a tricky thing, but I have always said I thought it could used in a manner similar to this.. guess the 720 will(possibly) launch a little earlier after all ;-)

Looking forward to using the new media playa on my slim

Better go play some BC2 before it's ruined also.... :-(

At least we'll have some work again, after the JTAG'able shortage

Thanks guys, (GliGli, Tiros, cOz, Razkar, tuxuser, cjak, Redline99, SeventhSon, tmbinc... I/we needed the work ;-)

So what use is this for already jtagged systems?, its just a way to jtag prett much any console?, and i guess its still detectable?

None, yes, yes.

I guess I am (was) one of the lucky few. I have 2 jasper jtags (1 for sale by the way :-)

All comanies are out of stock this device allready!!!!! Very sad ppl buying something they dont even know how to use it

I'll give you 20 quid for it

OMG great news!!! Gone are the days of people extorting $400+ for Jasper jtags lol

now it's gona be $400+ for non jtag jaspers

I found these boards on ebay,..

http://www.ebay.ca/itm/Xilinx-XC2C64A-CPLD...=item2c5eeb3685

not sure if they could be used, don't see why not, but don't yell at me if you buy and they no good

So currently is there any possibility to get the CPU key running Xell and flash FreeBOOT or XBReboot to the NAND on any Slim or supported (Opus, Zephyr) Fat console?

In other words what unsigned code can be run for the current moment thanks to the reset glitch hack?

excellent, messed up my first jtag, never got it running, gonna leave this for someone who knows what there doing, hopefully get a freeboot or something come out, and hopefully be able to play any region games cheers for the hard work

I believe that a version of freeboot specifically for the slim needs to be released in order for same capabilities as the current jtagged fats. homebrew can be run though as shown in emulator being run.

and yes to the cpukey... watch the video here....

http://xbox-360.logic-sunrise.com/news-341...disponible.html

and here...

http://xbox-360.logic-sunrise.com/news-341...box-360-en.html

Why I are we adding diodes and resistors for the fat, if using this board? Do you have a diagram?

Holy Cow!

Amazing! It's almost worth getting a second hand slim just to try this out....bet MS are pishing themselves over this

I always thought something like this would happen...it was only a matter of time

Excellent work!

AWESOME!!! The floodgates are back open! This should get the home-brew scene rolling alot faster now that everyone that accidentally updated there xbox's a couple years ago have a shot a redemption.

THANKS GliGli, Tiros, cOz, Razkar, tuxuser, cjak, Redline99, SeventhSon, tmbinc

I can't wait.

I have my board coming this week by DHL (shipped now!)

I have dumped my NAND (Jasper 16MB) and created the image_00000000.ecc.

Just waiting for the board.

thanks for all those involve in this.. i never thought it is still possible to run even xell, still waiting for more devepolment.. BTW no diagrams for jasper out yet?!?! i have 1 jasper here waiting to reconcile with its dvd key

this is even bigger news than 2012 prophecy

the diagrams are out for the jasper, they are in the reset_glitch_hack_v1.00.rar file

At first I thought it was the jasper, which I have, that wasn't supported yet, which I assumed was due to the bigger NAND, but it looks like it is the Falcon. If I were to do this to my Jasper, do I just use -r256 or -r512 in place of -r16, and the corresponding +r when writing? And use the jasper glitch file, of course.

This is all well and good, and kudos to the hard work that's gone into finding this, but I'd be interested to know if this will be detectable by live. I think it should be. After all, you only want to unlock the hardware so you can write homebrew for it, and not run pirated games. Backups my arse. Leave live alone for those that leave their consoles un-tampered.

thanks i have it already.. waiting for my coolrunner ordered in ebay.. BTW im from philippines.. thanks again

seeing as it will need to use a version of freeboot etc, it will be completely detectable by live, this is strictly offline and Xlink kai gaming

Does anyone have a diagram to an lpt connection to dump the nand on a slim? I don't have a USB nand reader and the prices online for them are crazy expensive.

Anyone know where to find a schematic for a usb-jtag cable?

There's a schematic in the pdf tut for an lpt cable and I found a schematic for a jtag3 cable for a xilinx spartan-3 board, but that's lpt also.

There must be some schematic for a diy usb cable, the one on the Digilent website is $47 and change + tax.

Same for ALL 360.

http://www.team-xecuter.com/forums/showthread.php?t=69336

Crazy price? The NAND-X or the Maximus 360 Nand Flasher..

http://www.kipper2k.com/usbflash.html

all info, links etc are there

good stuff.. i can now fix these xboxes that i got with lost dvd keys

I wonder if a XC9500XL series could be used?

I have a few SaveMii's laying around collecting dust, and a bunch blank XC9536XL chips aswell.

With the Diligent Cmod theres two resistors you need to remove and bridge with a wire, does this need to be done on these versions as the PCB design is different? http://www.ebay.co.uk/itm/Xilinx-CPLD-core...=item2c5ee98686

Look at the schematics in the file from http://www.sendspace.com/file/f7vrem

glitch48nofullpost.png shows what we need to do. I have ordered the one from eBay. Expecting it to arrive this week.

Why is everyone so eager to flash their 360's already? There isn't anything up right now other than booting into Xell.

Do you really need to ask that question with the amount of people out there chomping at the bit to get everything up and running on it ?

Ahh cheers

Yes because the question is Why are they chomping at the bit to get everything up and running on it. If your talking about the developers I don't think every person thats posted in here wanting to set it up is going to be developing something for this.

The reason why I ask the question is so that I have a reason to go and mod my slim right now.

Hmm it did not tell me much though. I will know more when the board arrives. Hopefully someone will know before me.

Lot's of these users have, up until now, useless xbox's without dvd keys. They can now recover these.

Basically all you need to do is look at the diagrams in that link then find what resistors go the same pin off the Ebay XC2C64A then do what you need to do to the resistors. I think anyway

I'm sure someone is bound to clear it up anyway

+1 It's enough for me to order the board.

And you can find the datasheet for the "eBay"-board here:
http://www.sendspace.com/file/1b5ntu

Looks like we have R1 and R2 there too.

Here are all my files from when I was making the USB SPI Flashers last year.
Everything you will need to build your own nand flasher. In the next day or 2 I will upload a board layout and scematic for a simplified version of the Xilinx CoolRunner II CPLD (C-Mod)

Sendspace

Congratulations for all people involved in such epic achievement!!! Really amazing job, a new era for Xbox-360 scene!

New things will come out like an avalanche now!

Does anyone know why xenon can't be supported (according to comments)?

Kool, you have anymore of those flashers?

Few quick questions im not into jtag and dont know much about it but is this LIVE safe?

I have an elite with a 150W PSU and from wat i read back a few pages this cant be xelled?
Also i have a old non hdmi (refurbished) box from 2006 with a 203W supply but im not sure if that psu was the original is this one xellable?

I really hope at least one of them is, this discovery is making me wanna see what all the jtag hype is about.

Might have to dig up some of my old mobo's without drives to see if any of those can run it (assuming you can run a 500gb WD as a 500gb WD with ripping ability?)

Nope never. Offline only.