ok so i been fixing and selling xboxes and have come to a point where i ran out of the things..
Well i have 2 left.
a 1.0 and a 1.6.. thing is i only have 1 working dvd player So the 1.0 is going to get the slimbox treatment.

I want to purty it up though and was wondering about any colour schems you guys liked. now im no artist so its never going to have awesome paterns or anything, Its gonna be a case of tape this part up and spray paint whatever with diferent colours.
Im happy with 1 colour utilizing the black of the xbox, or 2 colours. or 1 colour for the whole thing excetera.
i dont want 3+ colours (unless one of them is black thats on the box already)

Any way like i asked i would be greatful of sugestions and pictures wherever possible so i can also decide.
(the pictures dont need to be of slim boxes)
Thnx.

Hey buddy take a look at the image topic at the top of the case mod forum. Got some cool colours in there. My favourite tho is a guy who spray it White and put smoked out windows at the top, looked amazing, it's in that image topic tho. Mines just bog standard colour slim box, i wanted it to look like a retro xbox still, but more modern. Take some pictures and post them when your done dude

Start with this bud, this should give you some ideas.............

http://diy.sickmods.net/Tutorials/Case_Mod..._Color_Chooser/

think im gonna go monochrome.

its a v1.1 board but..
so far i have cut the case down, tsop'd it. cut down the sheilding. changed the 1.1 GPU heatsing for a 1.0 and added a fan to the gpu. added a fan to the cpu and modified the rear fan. Cut down the dvd holder and made the mounts for the hard disk. installed a 40gb hard disk (just for testing) taken off the front panel and other plastics and given them a decent key for the paint, and now im wating on the paint to arrive.

heres 1 image for now. I would take more but i dont want to reassemble it then take it apart to many times lol.

Looks like it's coming along well. Watch your temps on the hard drive after you get it reassembled, i've found that if you have a fan on the GPU like that it will actually make the hard drive run hotter as it kinda slows down the cold air coming into the case on that side. I saw a 10F difference when i took the fan off.

What is this monochrome you speak of? Sounds f'ing cool

What screws do you guys use on your slims? (To close them) That is one of the last things i need on mine.

havent tried it yet.. But the 360 screws are shorter and should work ok (just checked by eye not by actualy trying it yet.)
They are also a bit thinner so im either gonna use some epoxy in the holes on the top part of the case let it dry and use the screws to thread it. or melt some plastic in there and use a hot screw to thread it..
I think the epoxy is probably the best idea il just use something like 70/30 (hardner to resin) instead of the usual 50/50



Monochrome is just black and white.
Im gonna spray the X white. and toutch up the rest of it with black. i went for gloss finish so it should be shiny. I have also orderd a led 80mm fan and i'm going to replace the jewel with that and a dragon designed fan grill. This should make it one of the coolest (least hot) xboxes arround, il jump the 80mm fan from the dvd power i may put a switch on the back to switch fom 5v to 12v but not sure about that yet and i may well just have it running at 5v all the time given it already has 3 fans and the 80mm witll make it 4.
I also swaped out the 1.1 board for a 1.0 board. The 1.1 was a littel bit tempromental as i had reflowd the gpu on it. so i decided better purt in a 100% working board in there. given that its likley to be hotter than normal boxes.

Still wating on my paint and the other stuff i hope it will be a nice day when it arrives as i need to spray it outside. and i dont want it orange pealing on me.

Sounds like a good idea, I'm curious how nextelhalo closed his up.

The best screws that i've found have been Sheetmetal Screws. They are #8 x 2 1/2". They fit perfectly for a standard slim and they are phillips head so no more messing with the torque bits.

Just like this but with the above size. Comes is packages of 3 so all you need is 2 packages and your set:

http://www.homedepot.com/Tools-Hardware-Ha...catalogId=10053

Alright cool thanks

ok my paint arrived today im new to this spray paint stuff to i had to do some test bits 1st. well they seemed fine so i started doing the box.
and guess what i found out??

150ml spray can is not enough!
so i have to go out to buy more. so if your thinking of doing it. id say you need atleast 300ml if not more.

Wating on my dremmel to arrive now. (lame) basic paint job done though, will finish off the white after I cut the hole for the fan. I think the lil draggon thingy will look decent though.

had to take the fan off the cpu heatsink to make the 80mm fan fit but wasnt too bad. I also had to change where and how the hard disk was supported by the dvd drive frame thing.
But here it is all in 1 piece again.
I havent screwed it shut yet and want to sand it down with some 400 Wet and dry again before giving it its final coat of paint,
I think the black came out pretty good, the fan has led's that change colour and come on randomly all in all i think it looks reasonable.

nice job, I always like storm trooper Xbox's.
-PTF

With regards to screws don't over complicate it, any wood screws will do, just cut them down to the right size and screw them in with a electric screw driver, just some standard philips head wood screws in mine and the things on solid, once in I can just screw them back in and out with a normal screw driver

Box looks awsome mate, just watch out when you put the hard drive in it isn't in the way of one of the main screw holes, it can give you problems puttin the lid on properly if it is, just put the hard drive a bit further back to fix it

Also last thing, get some wireless controllers ( madcatz are good) take the wireless casing apart and put it internal, u just need to unscrew the control ports, dremel it in half ( so controller 1 and 2 ports are separate) break the little graphite ring ( so u have more cable) and stick it inside. Can use control ports off and old box to put into the old holder for the control ports so it looks like they are still there from the outside

Yeah i took a while to make sure the hard disk was not going to be in the way of any screw holes, then when i added the 80mm fan i had to move it again But a bit of dremmel work later it was fine, and not blocking screw holes either.
Ive sanded it down with 400 wet and dry now. so its back to a matt finish ready for its final coat of paint. I know the can says i can just spray over it again if i let it dry for 24 hours. but i prefer to sand it back a little just so the gloss finish is gone and im sure it has a good key then sprey it again.
I go on the re-coat after 30mins and before 40 mins or wait 24hours and sand back then do it theory, "that may well just be my very own theory i made up out of no where but thats how i do it

ok any way for any one wondering about how much paint it needs..
The white parts id recomend 600ml atleast of paint
The black parts are easily done with 150ml.
and to primer the whole lot 400ml should be enough..
And its better to have to much paint and not need it than not to have enough and need more.
Wish i had read similar about paint beore i started lol..
Seriously 150ml is no where near enough