good morning people i have a problem with my jtaged xbox i have done it all my self and checked every solder with my multimeter from different points and i get continuity i ripped 3 nands all the same with no errors i also put the 2 files in to the new nand as per the tut all that went fine and flashed it back to my 360 it gets to loading the 360 logo then goes to e79 screen and i have checked all of the soldering again and it all checks out so any ideas anyone?

if your using diodes make sure they are facing the right way because they are polarized.

it can also be because of bad wieing, or broken traces you say you checked continuity though.. But i would still double and tripple check your solder points.

i have checked that and replaced the diodes 3 times and then triple checked my triple checking.

Which tutorial did you use? If you are using some of the latest jtag tools you should just be able to create the freeboot nand and flash it.