Jan 19 2012, 03:37 PM
I bought a hd player for the enclosure so I can mount my hitachi drive inside of it.
I want to be able to press eject from the enclosure.http://dwl.xbox-scene.com/tutorial/Xbox_360-HandC-V1_4.pdf
Pg 16 says
Open/Close: momentary tied to gnd to open/close drive door.
Tray Status: +3.3 VDC tray is open. 0 v tray is closed.
which wires from the HD switch here do i need to connect too??
Thanks in advanced
Jan 19 2012, 08:36 PM
going to try to make the one on the HDplayer eject and the orig location as the mode B.
Jan 21 2012, 12:51 AM
Solder 2 wires from the underside of both switches.
Both switches have 2 contacts on the bottom. If you solder 2 wires from the Xbox motherboard eject switch to the HD DVD drive switch you can use the HD DVD drive eject without any complications
2 wires, 4 solder points
And as a recommendation, put a break point into it, so it's easier to mod.
Jan 21 2012, 02:37 AM
QUOTE(mouseym @ Jan 19 2012, 06:23 PM)
Yes this is the same link i found. I tried this type of mod before but messed up horribly. I put the wires back in wrong. Simple error.