got an old xbox ver 1.1 kernal version 1.0.4817.1
tsop it in 2003 with a
hynix korea
HY29F080T-90
0215A
its running unleash ,xbmc
cant run evox on it when i put it on it boots to the microsoft white logo and then keeps booting in a loop
its never been onto xbox live
i want to upgrade to the latest bios so i can put evox dash
so that i can have hd 1080i video
and to put a big hdd in the box
the old one died ive changed one with a 20gb one
want to put some emulators for the kids and use it as a xbmc machine to play movies from my nas
can it be done
thanks
i am posting a pic of it as well





Uploaded with ImageShack.us

any body out there
what bios to flash on this xbox version 1.1
with hynix chip
which is running unleash x and xbmc
got the hexen disk
but struggling with it
im totally new to this
thanks

Soldeer up the write points.
boot hexen,
go to Tsop/chipped tools.
tsop/chip flash (NON WINBOND)
Chose a 256k 1.0-1.5 bios

you should notice that it tells you which bios to use if you dont have a winbond chip.
Then it tells you which bios to use on a 1.0-1.5
And then it tells you if you dont know what size your chip is use the 256k Bios's as it will populate the space if its to small..

tells you all this on screen as your using hexen...

P.S
the tsop write points are not connected on that one...
Prehaps you have an enigma chip that was used to flash it?

thnaks
shambles
it means that its write protected
i dont think so i can solder those points by looking at the pic
they are very minute for me
is there any other way of flashing the tsop
can i get another modchip and install if its easier
how big the hdd i can install on this bios version on the xbox
just wanted to prepare for the kids to play emulators
and some iso of my own games
as the dvd drive doest work at the moment
have got a 20 gb hdd on it at the moment
have been experimenting with that
thanks for you help

PS is there any old version of evox dash which will run on this bios
the ones in the AID ive tried and it dosnt work

you can get some conductive paint or ink. and a miniature paint brush 4/0.
and simply paint the points together.
this is a bit easier as you wont damage the board, and if you do make a mistake you can clean it away before it dries.

How big hdd it will take with thu current bios

I dont know what bios you have..
pre lba48 support it would be about 155gb
with max partition size of 137gb.

im currently using this bios
using genuine bios --> Evox D6 EjectFix
so how big the hdd will it take
thanks

My opinion, you want Evox m8+ bios. Don't use 1.6 version.
Other than that you could use ind bios 5003.

Your choice. Flash one of these and you can use up to 2 tb hard drive with an adapter and xbpartitioner.

Old PATA IDE, go as big as you can find, not sure if it was 750 or 1 tb, but 500gb is probably the biggest you'll find.