Feb 24 2012, 11:55 PM
short question, I got a Xbox 1 from a friend with Evolution-X 3935 on it, should I upgrade, is there anything better available?
Other thing, iam looking for a way to quit games (I dont know how O_o), change the resolution, is there a menue for it? There is nothing in the evolution menu and I dont know how to change to the original xbox menue (heard that this is possible).
Feb 25 2012, 12:21 AM
UnleashX or XBMC are newer. Only XBMC is still being developed.
Left Trigger + Right Trigger + back + black will quit the game.
Before doing any dash upgrade you need to know how the Xbox is modded - or is this why you randomly chose to post in TSOP flashing section?
Feb 25 2012, 12:24 AM
My friend told me he did it with the 007 exploit/save game.
Iam looking also for the ENIGMAH VIDEO SELECTOR iso, do you have a linkk for me? :-)
Feb 25 2012, 12:28 AM
Which softmod did your friend install?
You won't get any links here - it's against the rules. Google will help you find Enigmah, but let's take this one step at a time!
Feb 25 2012, 12:36 AM
Well it is Evolution X 3935 and Project Mayhem, if this is it what you mean with softmod?!
Feb 25 2012, 12:44 AM
No. I mean SID or Krayzie, and which version.
If your friend doesn't know then the first place to start is with a softmod upgrade.
Feb 25 2012, 12:50 AM
Well this was 8 years ago, but I will ask him tomorow.
Is it possible to check this somewhere at/in the xbox?
Feb 25 2012, 01:02 AM
8 years ago, and you have a really old softmod.
Google "Heimdall's Xbox Engineering Disc". Burn to DVD-R at 4x or slower, and boot the Xbox with it in the DVD drive. LED turns red, 40 seconds later the menu appears. Select option 2.2.x to install a new, clean softmod - pick the one that fits your region plus any exploitable game you might have, but if you don't have an exploitable game the pick Splinter Cell (and don't worry - you don't need a copy of the game, it's just a useful back door).
If you want to try XBMC, boot with HeXEn again, and select option 4.1. - Install XBMC to E. It's not the latest XBMC, but if you like it - and I'm sure you will - I can talk you through updating to the latest version.
Edit: And HeXEn has Enigmah on it, for when you want to enable NTSC so you can get HD output.
Feb 25 2012, 07:28 PM
Well, I burned the DVD and the xbox bootet from it.
I installed the hexen software and also the XBMC to E:, then I tried to install the "enable HD" and the Enigmah, but this doesnt work because the HD installer will copy/delete some files from C: but in my system menue it shows me only a C: with 0.00/0.00 free space.
Feb 25 2012, 07:32 PM
You don't install HeXEn, you use HeXEn to install other things, and to alter the setup on your Xbox.
You don't install "enable HD".
So, can you explain what you did, and what error messages you get, and at what point in the installation / setup?
Feb 25 2012, 07:36 PM
I sticked to that what you wrote yesterday:
"Burn to DVD-R at 4x or slower, and boot the Xbox with it in the DVD drive. LED turns red, 40 seconds later the menu appears. Select option 2.2.x to install a new, clean softmod - pick the one that fits your region plus any exploitable game you might have, but if you don't have an exploitable game the pick Splinter Cell (and don't worry - you don't need a copy of the game, it's just a useful back door).
If you want to try XBMC, boot with HeXEn again, and select option 4.1. - Install XBMC to E."
Then I tried to enable HD, but this is not possible because it dont finds a batch file on c:, but ther is only a C: with 0 fre space.
Hope this helps... :-)
Feb 25 2012, 07:38 PM
Which options did you select, in what order, and when EXACTLY did you get the error message, and what was the error message?
Feb 25 2012, 07:51 PM
Ok, excact Version:
1.I burned the .iso to a DVD-R and booted the Xbox with the DVD it in the DVD drive.
2.LED turned red, 40 seconds later the menu appeared.
3. I selected the option 2.2.x (Splinter Cell) to install a new, clean softmod
4. After it finished, I backed up the eprom to E:
5. I rebooted with the DVD in the box and selected then option 4.1. -and installed XBMC to E:
6. I probably rebootet and started then the Option 1. what is the Enigmah but it doesnt worked ( I dont remember the error)
7. I started the Enable HD Option, Option 6.2 , it copied some files to E: and told me to reboot after i had to press A and then when Enigmah Shows up B. Then I rebootet with the left/right button unter the controller an the black button on the right side. Then it booted and I got the error:" Call customer service."
8. After I rebooted anyway, I pressed as told the buttons an it started but then I got the error: "Unable to launch C:\xboxdash.xbe - The file does not exist".
When i start the Xbox without the DVD I only see a menue where I cna copy Apps and so from the CD to E:
When I wnant to launch what ever, I have to enter a CODE
So, thats it.
Feb 25 2012, 08:05 PM
Which option 2.2.x? 2.2.4, or 2.2.7? Is your TV PAL, or NTSC?
Start again. Once you've modded the Xbox from scratch (HeXEn Option 2.2.x, where x is either 4 or 7, and remember which it is) remove HeXEn, reboot, and make sure the Xbox will boot properly to UnleashX.
Then reboot with HeXEn, install XBMC to E (Option 4.1). Reboot without HeXEn, and make sure you can run XBMC.
Reboot with HeXEn again. Select "Option 1. NTSC-PAL Video Mode Switch", and switch your Xbox to NTSC. Remove HeXEn, reboot and make sure you can see your screen.
Plug in your component cable. Reboot with HeXEn and select "6.2. HD Enable - Krayzie 1.1.1 Softmod". Follow the instructions. If you get an error, write down EXACTLY what the error message is, and what happened immediately before the error message.
Feb 25 2012, 08:36 PM
Well, I booted from the DVD and then I installed 2.2.4 (PAL SC).
I went back to the main menue and there where 3 options 1 was to backup the eprom an other on install something (dont remember). I did nothing and did a hard-reboot without the DVD.
Now is there the original Xbox menue O_o and it doesnt read the DVD anymore.
But I have the original Splinter Cell DVD here.
Feb 25 2012, 09:32 PM
Where in the instructions did it tell you to reboot after backing up the eeprom? You backup the eeprom, then select "Basic Install, UnleashX Dashboard", because you want to install the softmod......
Load Splinter Cell, load the gamesave, install the softmod from scratch.
Feb 26 2012, 05:04 AM
Sorry but Lol.
You would do well to fully follow every little step exactly as told by heimdall..
Il give you a summary of what hes telling you so you understand why hes telling you these things..
When you have a softmod from a game exploit it is usualy old. So we update them.
You use the hexen disk to Update the softmod, it does this by 1st deleting the old softmod then installing the new one to do this you 1st select the option in hexen, it then does its thing and makes you back up your eeprom. when its gone to the next screen you select the back up eeprom option again and it will say "Backing up eeprom
" then you use the back to settings menu option and you will see a "basic install Unleash-x or similar option" that will then install the updated soft mod for you and make you a nice safe shadow c.
After you have done that You can then go back to hexen and use the hexen options to change your display settings to ntsc. you simply press a or b like the thing tells you. then restart. if you can display ntsc on your tv when you restart the picture will be good so you can then go back to hexen and enable the hd video modes..
Now thats the basic version.
if you want to be able to do it you need to read carfully what your told and do it exactly like told.
Any time you think Hmm.. im stuck, il just reboot.. say "WAIT STOP, did the instructions tell me to reboot here?? I better go double check them. and if they seem unclear I should ask a question and get an answer before rebooting"
and have fun heimdall. Il be here chuckeling in the shaddows.
Feb 26 2012, 06:47 AM
QUOTE(shambles1980 @ Feb 26 2012, 05:04 AM)
Il be here chuckeling in the shaddows.
Feb 26 2012, 04:20 PM
Well, I appreciate the help but you wrote nothing about to backup the eprom or installing unleashed.
You told me to install 2.2.4 and reboot, I will hotswap the disk and start again.
Thx for the help.
Feb 29 2012, 12:49 PM
Everything is working fine now.
This is a "lo-fi" version of our main content. To view the full version with more information, formatting and images, please click here