Somewhere during all that my eject and power buttons stopped working. the only way i can power my console on is with my controller. The eject and power button on the console do nothing at all. Infact even once the console is on the eject/power buttons still don't work. To open the disc tray i have to do it from the menu with controller.
now my "guess's" as to whats wrong is perhaps dash launch isn't setup right? I can't remember exactly how i setup the .ini but i believe i only mapped one button
my second guess is the firmware i flashed was done wrong somehow. When i first jtaged i used some fancy wire guide by black or w/e his name is, and now i guess its not very popular anymore as its not listed in shrimps or others nand builder.
um so this was my first upgrade since i first jtaged it, i used fbbuild 0.33i think, and i grabbed a dump from the xbox and used that. Then i let fbbuild take the smc ect from that flashdump and i still have that log file so i will try to post it now
CODE
------ parsing user ini at '.\mydata\options.ini' ------
loading file...done!
pre-parsing and sanitizing
done!
User options.ini loaded, 0x13a bytes in memory
loading cpukey.txt from .\mydata\cpukey.txt
loading 1blkey.txt from 1blkey.txt
Using nonandmu option (ini file)
------ Checking .\mydata\nanddump.bin ------
Loading NAND dump...done!
NAND dump is from a small block machine
NAND dump uses small block controller
parsing dump into user and spare...
done!
decrypting KeyVault at address 0x4000 of size 0x4000
keyvault decrypted OK, will use if no kv.bin is provided
decrypting SMC at address 0x1000 of size 0x3000
SMC decrypted OK, checking for hack
SMC in image is hacked, will use if no external smc.bin is provided
seeking smc config in dump...found at offset 0xf7c000! Using if no smc config is provided.
MobileB.dat found at page 0x6d8c, size 2048 (0x800) bytes
------ ini parsing completed ------
output name overridden to: updflash.bin
Writing initial header to flash image
------ Loading bootloaders and required security files ------
could not read \bin\payload.bin, using built in payload (0x200 bytes)
reading .\mydata\smc.bin failed, using smc.bin from nand dump
reading .\mydata\kv.bin failed, using kv.bin from nand dump
could not read \bin\freeboot.bin, using built in core (0xd50 bytes)
reading .\13604\bin\patches_falcon.bin (0x8bc bytes)
**** ldv line 3 set to 00 f0 type: 3
xell not found in perbuild directory, checking firmware /bin folder
xell not found in firmware /bin folder, checking base path
reading xell-2f.bin (0x38a60 bytes)
reading .\mydata\smc_config.bin failed, using smc_config.bin from nand dump
-------------------
checking smc_config
-------------------
extracting config
------------------
---------------------
Checking ini for smc config data patches
smc was not patched
---------------------
done!
------ Encrypting and finalizing bootloaders ------
patching payload.bin to load size 0xd50 (0x354 reps)
hack found in smc.bin!
done!
------ Adding bootloaders to flash image ------
Fixing up FS table...done!
Writing zeropair CG patch slot overflow data to sysupdate.xexp1...done!
Writing target CG patch slot overflow data to sysupdate.xexp2...done!
------ adding 26 firmware files ------
***** could not read .\13604\..\launch.xex, skipping *****
***** could not read .\13604\..\lhelper.xex, skipping *****
------ adding 4 security files ------
reading .\mydata\crl.bin (0x9e0 bytes)
writing as crl.bin to flash
reading .\mydata\dae.bin (0xad30 bytes)
writing as dae.bin to flash
reading .\mydata\extended.bin (0x4000 bytes)
writing as extended.bin to flash
reading .\mydata\secdata.bin (0x400 bytes)
writing as secdata.bin to flash
------ checking for Mobile*.dat ------
MobileB.dat was found in dump, 0x800 bytes, adding type 0x31
------ adding smc_config.bin ------
------ finalizing image ------
Fixing up empty FS block entries...done!
Writing FS table to image...done!
calculating ECD bytes and assembling raw image...done!
writing file 'updflash.bin' to disk...done!
updflash.bin written OK
loading file...done!
pre-parsing and sanitizing
done!
User options.ini loaded, 0x13a bytes in memory
loading cpukey.txt from .\mydata\cpukey.txt
loading 1blkey.txt from 1blkey.txt
Using nonandmu option (ini file)
------ Checking .\mydata\nanddump.bin ------
Loading NAND dump...done!
NAND dump is from a small block machine
NAND dump uses small block controller
parsing dump into user and spare...
done!
decrypting KeyVault at address 0x4000 of size 0x4000
keyvault decrypted OK, will use if no kv.bin is provided
decrypting SMC at address 0x1000 of size 0x3000
SMC decrypted OK, checking for hack
SMC in image is hacked, will use if no external smc.bin is provided
seeking smc config in dump...found at offset 0xf7c000! Using if no smc config is provided.
MobileB.dat found at page 0x6d8c, size 2048 (0x800) bytes
------ ini parsing completed ------
output name overridden to: updflash.bin
Writing initial header to flash image
------ Loading bootloaders and required security files ------
could not read \bin\payload.bin, using built in payload (0x200 bytes)
reading .\mydata\smc.bin failed, using smc.bin from nand dump
reading .\mydata\kv.bin failed, using kv.bin from nand dump
could not read \bin\freeboot.bin, using built in core (0xd50 bytes)
reading .\13604\bin\patches_falcon.bin (0x8bc bytes)
**** ldv line 3 set to 00 f0 type: 3
xell not found in perbuild directory, checking firmware /bin folder
xell not found in firmware /bin folder, checking base path
reading xell-2f.bin (0x38a60 bytes)
reading .\mydata\smc_config.bin failed, using smc_config.bin from nand dump
-------------------
checking smc_config
-------------------
extracting config
------------------
---------------------
Checking ini for smc config data patches
smc was not patched
---------------------
done!
------ Encrypting and finalizing bootloaders ------
patching payload.bin to load size 0xd50 (0x354 reps)
hack found in smc.bin!
done!
------ Adding bootloaders to flash image ------
Fixing up FS table...done!
Writing zeropair CG patch slot overflow data to sysupdate.xexp1...done!
Writing target CG patch slot overflow data to sysupdate.xexp2...done!
------ adding 26 firmware files ------
***** could not read .\13604\..\launch.xex, skipping *****
***** could not read .\13604\..\lhelper.xex, skipping *****
------ adding 4 security files ------
reading .\mydata\crl.bin (0x9e0 bytes)
writing as crl.bin to flash
reading .\mydata\dae.bin (0xad30 bytes)
writing as dae.bin to flash
reading .\mydata\extended.bin (0x4000 bytes)
writing as extended.bin to flash
reading .\mydata\secdata.bin (0x400 bytes)
writing as secdata.bin to flash
------ checking for Mobile*.dat ------
MobileB.dat was found in dump, 0x800 bytes, adding type 0x31
------ adding smc_config.bin ------
------ finalizing image ------
Fixing up empty FS block entries...done!
Writing FS table to image...done!
calculating ECD bytes and assembling raw image...done!
writing file 'updflash.bin' to disk...done!
updflash.bin written OK
so yah if anyone could help me out im starting to think my problem was fbbuild now but not sure what happened or how to fix it