ok this customer wanted a simple looking mod of prince here is the first cut of the front before sanding.

let me know what you think

I always enjoy seeing your mods, very detailed cuts. Thanks for sharing your work with us, now if only I can cut out an image like that I might have something to brag about.

Very nice cuts.. Looks a little like Drake. LOL...

lol kinda does thanks bro

all cleaned up and sanded down

That is awsome bud! which tool on the dremmel did u use to cut that out?
thanks

here is the paint job disney purple and it will have gold trim




here is the paint job disney purple and it will have gold trim

On second thought, with the case standing upright, u can c the mark on his cheek. It does look like queer ass Prince...

I once knew a guy that had Prince posters on his wall...

Had a hard time hangin' with him after i found out...

What tool did u use for the cut out and what type of paint are you using etc? be greatful for the tips

i used a dremel tool with a dimond engravers bit.as for paint its disney paint you can get it at home depot but make sure you use adhession promotor if your gonna use that paint on plastic.

here are a few finished pics will have video soon.

Is that the same paint used on the princess frog box?

What type of paint is the Disney paint. passed by it the other day in home depot but i was in a rush and gave my daughter the swatches with Mickey on em to occupy her. lol...

Never mind the paint question. Its Behr interior/exterior. Thats usually a waterborne paint. what did u thin and spray it with?

yes same paint its more like a all around paint when used from a spray can i first used it on my house in a few rooms then tried it on plastic with spray gun and adhississon promotor with 3 clear coats and it came out better then spray paint and it does not chip or web even in cold temps.the price is kinda high per gallon like 30 buck or so a gallon.but the color is very vivd and drys very nice.it takes to the clear coat very well.

Right.. Rattle can paint is shit... what type of gun u shoot it out? Did u thin it?

just a standerd auto motive spray can hooked to a compressor no i did not thin it at all

the paint is only 2.94 for an 8oz sample. 2 of those and you should be good..



Nice.. I use these. they are IWATA knockoffs but really well made. The difference between a good gun and a cheap gun is REALLY night and day...

What size tip did you use for the gun.?

PRINCE CASE MOD ALL DONE PEEP IT