I just finished updating the firmware on my new IHAS224 drive, which appeared to be successful, but am unable to burn any backups now.

I'm receiving an error that it cannot verify media capacity. I'm getting this with Sing Verbatims as well as other discs. To test it, I hit "ignore" to see if it would still burn correctly but it stopped around 92% or so.

Any ideas?

Fixed it! It turns out the issue was that the firmware I had was newer than the one the new max burner was written for. As the instructions say "upgrade to the newest firmware," this probably threw off others as well.

As the exe's found for Lite-On drives expect you have a specific firmware before, you can't use them to downgrade but you can find stock firmware here!

http://www.firmwarehq.com/

The firmware here just writes to your drive and doesn't care what's on there before. This means, as long as you haven't bricked your drive, you can revert to stock with their file, upgrade to the required firmware and NOT THE NEWEST, then flash max burner over!

Hope that helps some of you