Aug 3 2003, 09:48 PM
well ive got installed the xecuter 2.2 pro ive flashed my bios with evo6 in 2 banks cromwell in one and x2 4977 in the other, ive created a xiso disk and the box boots with this disk, but when i go into settings my ip comes up as 0.0.0.0 so i cant access my box to ftp to it. can anybody help me please?
Aug 3 2003, 10:05 PM
assuming your are using evox, check your network settings in the evox.ini file - if you need more help let us know what your network config is
Aug 4 2003, 08:12 AM
thats the problem at the moment ive got the original xbox hard drive with the software thats already installed on it and i want to install evolutionx on it but i cant get an ip address so it wont let me do this, can anybody help me?
Aug 4 2003, 09:40 AM
use a cd dumass
Aug 4 2003, 12:08 PM
if you would care to read the first post im trying to use a cd F***K Face
Aug 4 2003, 01:18 PM
I have not done this in a long time. But here is one way to do it. Before making the iso edit the evox ini file and put the ip address in it. Then make your iso and burn it to cd. Now boot with the cd and the ip adress should be right. Someone correct me if I am wrong.
Aug 4 2003, 01:47 PM
Yeah, setup static IP = yes and then put in the IP address you want the Xbox to use.
If that doesn't work then let us know more about your network setup (i.e. hubs, router, cables, etc.).
Aug 4 2003, 07:20 PM
thanx guys your a star thats done the trick
This is a "lo-fi" version of our main content. To view the full version with more information, formatting and images, please click here